Product	Name	Organoid® SKELETTBLÄTTER medium on Flexi 	
	Article number	SKL0000045FLXST	
Producer	Address	ORGANOID TECHNOLOGIES GMBH
Nesselgarten 422 / Top 5
A-6500 Fließ
Austria
	
Description and applications	Name	Organoid® SKELETTBLÄTTER medium on Flexi 	
	Description	Natural plant Material in medium density on brown flexi, produced climate neutral in Tyrol	
	Applications	As wallpaper  
As a compound in wood-working
Can be used in sewing
	
Plant material and density	Plant material	Delicate skeleton leaves	
	Density	Medium coverage (approx. 70 leaves/m²), backing is part of the design
	
Size and weight	Size	1 360 mm by 2 950 mm	
	Thickness	0.2 mm	
	Weight	180 g/m²
	
Product requirements	Food-safety	Binding agent safe for usage in contact with food in accordance with EU-regulation 1935/2004
	
Backing material	Material	Flexi, brown	
	Properties	Nonwoven fabric 
Thin and bendable
No glue penetration
80 % natural cellulose	
		Tensile strength length 4.700 N/m
Tensile strength width 2.200 N/m
Tear resistance across 6,5 N
	
Technical implementation	Cut	Use scissors, a cutter or a plotter	
	Edges	Allow for imperfections 1-2 mm around the edges	
	How to install	As wallpaper:
•	Wall-pasting technique: Apply glue directly on the wall, apply wallpaper vertically and press on using a rubber roller
•	Double cut: Each panel overlaps with the one next to it (approx. 2 cm) 
•	Free match: The naturally scattered materials do not require matching patterns between panels

As a compound in wood-working
•	Process with normal wood-working machinery
•	Glue (e.g. white glue) is applied onto the wooden materials, as the fleece absorbs moisture and glue stains may appear on the front if glue is applied to the fleece
•	Cover the natural surface with the enclosed separating paper
•	Guidelines:
Max. pressing temperature. 60°C
Max. pressure 1 kg/cm²
Glue application: approx. 100 g/m²
Pressing time: approx. 15 minutes

Pre-trials and tests are recommended
	
	Glue recommendations	As wallpaper: Glutolin ECC extra clear
As a compound in wood-working: White glue	
	Pay attention to	Surface must be clean, dry, weight-bearing, evenly absorbent, smooth, dust-free and neutral in colour. Recently plastered walls must be fully dried. Highly absorbent walls must be prepared with a suitable base. 

For sensitive wood-working applications, use a counter-balance (enclosed on request). Symmetrical construction is recommended, which means using the same surface on the front and back side.

Acclimatisation of Organoid natural surfaces: 
•	Bring product to room temperature before unpacking 
•	Store product protected from light, at about 20°C and 30-60 % relative humidity.

Storage:
•	Rolled goods: hanging system
(e.g. paternoster)
•	Single panels: horizontal position 
(e.g. drawer system)	
	Processing guidelines available at:	www.organoids.com/en/installation-technical-implementation